FT Banner.jpg
FT Banner.jpg

Flight Termination System

Up to 4 remote units in parallel


Flight Termination System

Up to 4 remote units in parallel

The IMC Flight Termination System (FTS) is a completely redundant and transportable solution. It includes an exciter, transmitter, RF power amplifier, antenna, and recording unit. It transmits necessary codes (IRIG 313-01 tones or digital secure FSK codes) to check, monitor, arm, and destruct a missile or UAV in flight equipped with a FTR (Flight Termination Receiver). The system is capable of controlling up to 4 remote units in parallel.

A GUI management system is included for configuration of each unit. The system is compatible with IMC Flight Termination Receivers or any other standard receivers that comply with IRIG standards.

FTS system Key Features

  • IRIG 313-01 complaint

  • Automatic 1:1 redundancy

  • Command tone verification

  • Fully configurable using GUI (frequency, tones, commands, etc.)

  • Operational from main unit or up to 4 remote units.

  • Remote Control unit (optional)

  • Switch Guards on all toggle switches

  • Air transportable in Operational Transit Case

System composition

  • Main command and control unit (MCCU)

  • Remote command and control unit (RCCU)

  • Power Amplifier – 50W – 500W

  • Monitoring and logging unit

  • Supported GUI management system


  • 3 rack units high, shock mounted – Exciter/Transmitter

  • 3 rack units high, shock mounted – Power amplifier

  • 1 rack units high, shock mounted – Recording unit

Capability Range

Specification Range 
Carrier Frequency 400MHz - 450 MHz (configurable)
Carrier Frequency Tolerance 20 (confgiure up to 6 per command )
Output Power Wideband FM
Multi Tragets Up to 4 simulatinus
Tone output signal delay < 5 milliseconds
Prime Power 115-230 VAC
Remote Activation remote panel command buttons
Remote Programming RS-232 interface - using supplied GUI
Fault Detection RF output power, tone monitor


  • 100-1000 Watt Power Amplifiers

  • Multi targets support (up to 4 targets)

  • Antenna – Helical , Omni ( include cables and tripod )

  • Customizable to fit your needs

Customize your Flight Termination System We can fit it to your needs


Flight Termination Receiver

Designed for harshest environmental conditions

Flight Termination Receiver

Designed for harshest environmental conditions

IMC IREC-4050-6-FTR is an innovative miniature and rugged airborne FTR (Flight Termination Receiver), designed to withstand the harshest environmental conditions as required in the most advanced missile and UAV platforms. It is highly sensitive and has very high jammer tolerance. The IMC FTR is very reliable and meets the highest safety levels. It supports two simultaneous failsafe automatic detection scenarios.

The unit is fully programmable by using a GUI application. Configuration includes: flexible frequency setting, IRIG 6 Tones combinations of commands and failsafe threshold Level settings.

FTR Key Features

  • IRIG / RCC-319 compliant

  • Small size and light weight

  • Field programmable by a user friendly PC application

  • 4 programmable commands

  • Programmable failsafe threshold levels: DC voltage power supply drops, absence of received signal, and definition of RSSI minimum required reception level in volts

  • Events report via RS422 interface: triggered failsafe events, received tones, device temperature, RSSI level

Capability Range

Specification Range 
Frequency 400-450 MHz 
Programmable command modes 6 Tone IRIG Mode
Sensitivity    -107 ÷ -116 dBm
Operating input voltage 22 ÷ 36VDC
Size Less than 4 in³ / 25 cm³
Weight Less than 5 oz. / 140 gr. 
FT receiver.jpg

Customize your Flight Termination Receiver We can fit it to your needs